Krahasso Krahasso
Measurement tools

Connect a Leica DISTO to Krahasso

Pair your Leica DISTO with the Krahasso app over Bluetooth. Every measurement lands straight in the wall you are drawing.

Go to the feature Floor plan & measurements

About

When measuring up, you draw the floorplan in the Krahasso app and measure the walls with the laser. With a Leica DISTO paired, it sends every reading to the app over Bluetooth. You read nothing off and type nothing in.

What it does

  • Sends the wall measurement from the DISTO straight into the floorplan
  • Records per wall whether it was measured or typed in by hand
  • Applies lengths only. An area or volume result from the DISTO is not entered as a wall measurement.
  • Asks first when a reading is much longer than the wall as drawn
  • Works without internet, in the basement too

How it works

The DISTO connects to the app over Bluetooth. You select the wall in the floorplan and press the measure button on the DISTO. The value is applied at once, and Krahasso calculates areas, wall areas and volume from it.

Requirements

  • A Krahasso account with the Krahasso app on an iPhone, iPad or Android device
  • A supported Leica DISTO with Bluetooth
  • Bluetooth switched on at the phone or tablet and allowed for Krahasso

Supported models

Krahasso connects to the Leica DISTO models that use Bluetooth Smart.

Tested on hardware
  • DISTO D2G
Further models
  • DISTO D1
  • DISTO D2
  • DISTO D110
  • DISTO D5
  • DISTO D810 touch
  • DISTO S910
  • DISTO X1
  • DISTO X3
  • DISTO X4
  • DISTO X6

These models use the same radio protocol and connect to the app. We have not yet checked them on hardware. If you notice anything on a model, write to us.

Setup

  1. 1 Switch the DISTO on and enable Bluetooth on the device.
  2. 2 Switch Bluetooth on at your phone or tablet.
  3. 3 In the Krahasso app, open the project and its floorplan.
  4. 4 Tap Laser. The app searches for devices nearby.
  5. 5 Choose your DISTO from the list. The app says which device it is connected to.
  6. 6 Select the wall you want to measure.
  7. 7 Press the measure button on the DISTO. The value is applied to the wall.

FAQ

Which Leica models work?
The DISTO D2G is tested on hardware. The other listed models use the same radio profile and connect as well, but are not yet checked on hardware.
Do I also need an app from Leica?
No. The DISTO connects directly to the Krahasso app. If it is connected to another app at the moment, disconnect it there first, or Krahasso will not find it.
What happens when a reading cannot be right?
If the value is much longer than the wall as drawn, the app asks whether you want to apply or discard it. An area or volume result is not entered as a length.
Can I work without a laser?
Yes. You can type measurements in by hand at any time. The wall then records that the value was typed, not measured.
More integrations

Bosch, Leica and DISTO are trademarks of their respective owners. They are named here only to say which devices the Krahasso app works with. Krahasso is an independent product and has no business relationship with these manufacturers.

Get started

Your first job. Set up together.

We set up your warehouse and your first project with you. On the call we work out which modules fit your business. Every number that is right on site is right in the report.

Demo Download Krahasso on the App Store Get it on Google Play

30-day money-back guarantee. No credit card.