Software for tilers

Tiled wall by wall. Counted tile by tile.

For every wall you set the height, the starting edge and the format, the kitchen splashback included. Krahasso calculates the areas to DIN 18352 and counts the tiles per format. You know what to order before you write the quote.

  • Tile height per wall, with starting edge and format
  • Tiles counted per format, cuts as whole tiles, windows left out
  • Deductions to DIN 18352, bathtub and shower tray included

30 days free. No bank details.

A bathroom in the floor plan, beside it the tiler statistics with floor area, tiled wall area and the tile count

How a tiling job runs in Krahasso.

  1. 1

    Measure up

    Draw the bathroom and kitchen or scan them with LiDAR. Bathtub and shower tray are in the plan.

  2. 2

    Set the tile heights

    Height, starting edge and format per wall. In 3D your customer sees the bathroom already tiled.

  3. 3

    Quantities and order

    Wall and floor area to DIN 18352, tiles counted per format. From that you write the quote and order the material.

  4. 4

    Carry out and invoice

    Photos on the project, hours through time tracking. The invoice goes out as an e-invoice.

Key figures

Tiled walls, tiles, bath panel. Counted per room.

Switch the bathroom to "Tiler": Krahasso calculates to DIN 18352. Under "Wall tiles" you set how high the walls are tiled, all walls at once or wall by wall. Every figure follows at once, the tile count per format included.

A flat in 3D view, the bathroom tiled, the living rooms with herringbone parquet
Floor area 3.90 m²
The floor area to tile. Bathtub and shower tray are deducted once they exceed 0.1 m².
Tiled wall area 15.05 m²
Only the tiled zone of each wall, up to the height you set. In the example, all walls to 2.00 m.
Tiles per format 20 × 20 cm: approx. 410 pcs
The count per format, cut tiles counted whole. You order the material before you write the quote.
Reveals by area and length
Windows in the tiled zone bring their reveal with them, as area and as running metres.
Skirting
In running metres, only where the wall is not tiled down to the floor. A door up to 1.00 m wide is measured over.
Bath panel
The bathtub panel as an area of its own, for an item of its own.
Take-off per opening Door 0.90 × 2.00 m
Every door and window with what was deducted, with reveal and skirting. The working is in the plan.

Openings up to 0.10 m² measured over (DIN 18352 section 5.3.1), interruptions up to 1.00 m measured over (section 5.3.2).

The features for Tilers

Every feature has its own page, with everything it can do.

See every feature
Floor plan & measurements

Floor plan & measurements

Rooms, doors and windows drawn in minutes, or scanned by LiDAR on iPhone Pro and iPad Pro. Dimensions come off a Bluetooth laser, notes sit where something stands out. Areas, wall areas and volumes are worked out as you go. Painters, tilers and floor layers read their VOB quantities straight off.

New quote
Quote to
Familie Mustermann
Musterweg 12
Herr Max Mustermann
Private client
Quote details
Document type
Quote (binding)
Quote number
Assigned when it is sent
Price list
House list, restoration (v1)
Quote date
28.09.26
Valid until
28.10.26
Product or service
02.010 Leak detection with thermography and moisture readings

Non-destructive location of the cause, measurement log included.

1.880,00 €
5 psch · 390,00 € · 19 % VAT · 70,00 € discount
Add a line
Net
1.880,00 €
VAT
357,20 €
Total incl. VAT
2.237,20 €
Save

Quotes & orders

A quote that stands on its own and becomes an order when it is accepted. Each client gets their own price list. Named text templates behind it.

Bill of quantities imported
WE12_Wasserschaden.X83
GAEB DA XML 3.3 · X83
Item no. Short text Qty
01 Strip-out
01.0010
Lift and dispose of laminate flooring
Long text as in the client's LV
42,50 m²
01.0020
Remove skirting boards
Long text as in the client's LV
38,00 m
02 Painting
Note Work in an occupied flat, furniture cleared by the client
02.0010
Prime wall surfaces
Long text as in the client's LV
118,40 m²
02.0020
Emulsion paint, two coats
Long text as in the client's LV
118,40 m²

4 items in 2 sections imported, with item number and long text.

1 surcharge item left out. It is listed in the log.

Enter prices Export as X84

GAEB interface

Read the client's bill of quantities as an X83, with item numbers, sections and long text. Enter your prices and return it as an X84. The award as an X86 lands right on the quote.

Photos & documents
14 photos, correctly filed
Nothing loose in a camera roll
  • Damage assessment
    Question: affected building elements
    +2
  • Room on the floor plan
    Wohnzimmer, 57.67 m²
    +1
  • Measuring point MP-3
    Visit 4, screed 12.4 %
    +2
Documents
  • Leckortungsbericht.pdf 116 KB
  • Trocknungsprotokoll.pdf 284 KB

Photos & documents

Photos attached to the question, the room or the reading they belong to. Project files and notes sit right beside them.

Time tracking

Time tracking

Travel, work, break: one tap in the app, booked to the project. The office approves. The timesheet comes as a PDF.

Invoices & e-invoicing

Invoices & e-invoicing

Write invoices and send them as e-invoices. With your own number sequences and recurring invoices.

Hosted in Germany

Servers and backups sit in German data centres. Processing under Art. 28 GDPR, with the DPA included.

E-invoicing to EN 16931

With the Commerce module: every invoice as XRechnung or ZUGFeRD, mandatory fields checked before it goes out.

Backed up daily

Backups at a second German data-centre site, kept for 31 days.

Your data stays yours

Reports, receipts and documents download as files whenever you want. On request we hand over your complete data, including when you move on.

Get started

Pick your plan. Get to work.

30 days free. No bank details.